Faven Under Canopy Light Jumper Cable
Updated 18 Oct 2026
Faven Under Canopy Light Jumper Cable links two Faven under canopy lights that do not connect end to end, so one power cord can feed a daisy chain across a gap. Typically used to join two adjacent rows of lights on a bench. Available in 3 ft, 9 ft and 20 ft lengths.
Description
Jumper (extension) cable for daisy-chaining Faven under-canopy fixtures that are not directly adjacent, most often to link two neighbouring rows on one bench. Lengths 3 ft (0.9 m), 9 ft (2.7 m) and 20 ft (6.1 m). Connector type, wire gauge and current rating are not published.
Available variants
Accessories
All products in the Accessories range.
Faven Rubber End Caps (10-Pack)
Faven Rubber End Caps (10-Pack) seal the open connector at the end of a run of Faven under canopy lights so the fixtures keep their IP66 water and dust protection in wet grow rooms. Ten caps per pack, suitable for replacing lost caps or terminating additional light rows.
Faven Under Canopy Light Adjustable Stands (2-Pack)
Faven Under Canopy Light Adjustable Stands (2-Pack) raise Faven under canopy light bars off the bench at 8, 10 or 12 inches to place light correctly beneath the plant canopy. Mounting hardware included. Designed for Faven R6, R8 and Chroma fixtures.
Faven Under Canopy Light Coupling
Faven Under Canopy Light Coupling is a connector that joins two Faven under canopy light bars end to end, giving a secure and durable link when building continuous rows of fixtures along a bench. Sold individually, one coupling per unit, for Faven R6, R8 and Chroma bars.
Faven Watertight Communication Cable
Faven Watertight Communication Cable extends RJ12 control signal lines between Faven fixtures in wet grow rooms. IP67-rated screw-on connectors mate with the Faven T-Splitter or the communication port on Faven power cords. Offered as 30 cm or 4.5 m double-end and 3 m single-end cables.
Faven Watertight T-Splitter
Faven Watertight T-Splitter divides one RJ12 control line into two outputs to tidy communication wiring between Faven fixtures and controllers. The sealed IP67 housing protects the contacts from spray, high humidity and corrosion. Pairs with Faven watertight communication cables.
More from FAVEN Lighting
Other products by FAVEN Lighting.
Faven Chroma Power Cord Bundle
Faven Chroma Power Cord Bundle supplies power to Faven Chroma under canopy lights through a 10 ft (3 m) cord with built-in surge protection and a low-voltage dimming wire. Includes an IP66 end cap and a 10 ft single-end communication cable. 277 V version uses a NEMA L7 plug.
Faven Chroma Under Canopy Light
Faven Chroma Under Canopy Light is a 120 W LED bar with an adjustable R4-R9 spectrum and a separate 15 W far-red channel. IP66 sealed, internal driver. Works with Faven CX3, GrowFlux, approved RS485 adapters and 0-10V systems. Cords and controller sold separately.
Faven Chroma Under Canopy Starter Pack 4x4
Faven Chroma Under Canopy Starter Pack 4x4 is an under-canopy lighting kit for a 4x4 ft bench with two 120 W Faven Chroma spectrum-adjustable lights with far-red channel, plus controller, couplings, power cord, jumper cable, stands. Choice of cord voltage.
Faven Chroma Under Canopy Starter Pack 4x8
Faven Chroma Under Canopy Starter Pack 4x8 is an under-canopy lighting kit for a 4x8 ft bench with four 120 W Faven Chroma spectrum-adjustable lights with far-red channel, plus controller, power cord, jumper cable, stands. Choice of cord voltage.
Spotted an error, missing data, or have a comment? Send feedback to FAVEN Lighting.
Message FAVEN Lighting
Your message is delivered to the brand team.