Rhino Full Speed Hub
Updated 19 Oct 2026
Rhino Full Speed Hub is a plug that screws into the controller port of Rhino Ultra Silenced and Non-Silenced EC fans so that the fan runs constantly at full speed, equivalent to a 10 V signal, when no fan controller is connected.
Description
Rhino Full Speed Hub is a plug that screws into the controller port of Rhino Ultra Silenced and Non-Silenced EC fans so that the fan runs constantly at full speed, equivalent to a 10 V signal, when no fan controller is connected.
Rhino Spares
All products in the Rhino Spares range.
Rhino 0.3 m 3-Pin Adaptor
Rhino 0.3 m 3-Pin Adaptor is a 30 cm cable that connects the 3-pin plug of a Rhino EC fan to the 3.5 mm jack of a Rhino fan controller. It is supplied with all Rhino EC fans and sold separately as a spare or replacement.
Rhino 0.3 m RJ45 Adaptor
Rhino 0.3 m RJ45 Adaptor converts the RJ45 port of the Rhino 2EC + RH Fan Controller to the 3.5 mm jack used by Rhino EC fans. It is supplied with the 2EC + RH controller and sold separately as a spare or replacement.
Rhino 5 m Control Cable
Rhino 5 m Control Cable has 3.5 mm jacks at both ends and connects Rhino 1EC and 2EC controllers to Rhino EC fans up to 5 metres away, or the 2EC + RH via the RJ45 adaptor. It is supplied with all Rhino fans and sold as a spare.
Rhino RJ45 Extender for 2EC + RH (Pack A)
Rhino RJ45 Extender for 2EC + RH (Pack A) is a spare extension part for running the Rhino 2EC + RH Fan Controller to Rhino EC fans over greater distances using RJ45 connections. Sold by Global Air Supplies as controller spare Pack A.
Rhino RJ45 Extender for 2EC + RH (Pack B)
Rhino RJ45 Extender for 2EC + RH (Pack B) is a long spare cable with a small coupler that has RJ45 ports on both sides, used to connect the Rhino 2EC + RH Fan Controller to Rhino EC fans at greater distances.
More from Rhino
Other products by Rhino.
Rhino 1EC Fan Controller
Rhino 1EC Fan Controller is an affordable analogue thermostatic controller for Rhino EC exhaust fans. Three dials set the target temperature (20-30 °C) and the minimum and maximum fan speed, using a temperature probe; it is powered by the fan.
Rhino 2EC + RH Fan Controller
Rhino 2EC + RH Fan Controller is an environmental controller for Rhino EC intake and exhaust fans with separate day and night settings. A built-in digital sensor reads temperature, humidity and light, and the fan balancer holds negative pressure to within 1% of fan speed.
Rhino 2EC Fan Controller
Rhino 2EC Fan Controller is a compact thermostatic controller for Rhino EC intake and exhaust fans with a built-in fan balancer. Dials set minimum and maximum speed plus an offset that keeps negative pressure in the grow room.
Rhino EC Dimmer
Rhino EC Dimmer is a simple, low-cost dial controller that sets the speed of a Rhino EC fan anywhere from 0 to 100%. It has a durable plastic body with a printed dial scale, a side input port for the fan and two mounting brackets.
Spotted an error, missing data, or have a comment? Send feedback to Rhino.
Message Rhino
Your message is delivered to the brand team.